MikroTik RouterOS v6.35 [current]

To upgrade, click “Check for updates” at /system package in your RouterOS configuration interface, or head to our download page:http://www.mikrotik.com/download

*) arp – apply Linux Kernel patch to stop RouterOS from randomly exhibiting misplaced ARPs;
*) mipsbe – (excluding RB4xx and CRS series) fixed rare ethernet tx buffer corruption;
*) nand – implemented once a week nand refresh to improve stored data integrity (will increase sector writes);
*) pppoe-client – implemented fastpath support;
*) l2tp – implemented l2tp and lns fastpath/fasttrack support;
*) queue – added bucket-size setting to queues (derived from max-limit);
*) tile – fixed rare situation when some cores decide not to take part in packet processing till next reboot;
*) tunnels – fixed performance slowdown on any other tunnel disable/enable;
*) winbox – increased minimal required winbox version to 3.4;
*) wireless – added new package “wireless-rep”;
*) wireless – improved 1-chain 802.11ac station compatibility with other vendor multi-chain APs;
*) address-list – fixed crash in low memory situations;
*) bonding – fixed crash when creating vlans on bonding interface;
*) capsman – added 802.11g/n band;
*) capsman – fixed capsman extension channel names;
*) certificate – revoked certificates not showing as (R)evoked;
*) certificate – allow manual crl url addition;
*) chr – added support for VLAN on Hyper-V;
*) chr – fixed Hyper-V booting from SCSI;
*) chr – fixed Hyper-V on windows 8/10 reboot loop;
*) chr – fixed bridge firewall;
*) chr – fixed kernel crash when virtual ethernet was not connected to anything in Hyper-V;
*) chr – implemented automatic storage increase on disk image size increase;
*) chr – implemented kernel crash saving to autosupout.rif (will utilize additional 24Mb of RAM);
*) chr – make shutdown request from hyper-v work (might fix other hypervisor as well);
*) chr – no more installation on first boot;
*) chr – try to renew expired license once a hour instead of 100h;
*) cloud – don’t write minor status changes to storage;
*) console – fixed print follow in “/ip dns cache” menu;
*) console – show RouterOS Version in /interface wireless scan;
*) console – sort completions/hints in natural order;
*) console – update copyright notice;
*) defconf – fixed default configuration for SXT LTE;
*) dhcpv6-client – fixed wrong error message;
*) dhcpv6-client – fix ia expiration and lifetime validation;
*) dhcpv6-server – acquire binding on renew if it does not exist;
*) dude – (changes discussed here: viewtopic.php?f=8&t=104395);
*) dude – fixed dude login logging, no more shows as winbox login;
*) email – fixed send cmd server addr override;
*) ethernet – add option to see S-GPON-ONU module, GPON side SN in “/int eth mon sfp#”;
*) ethernet – do not allow to set self as master port;
*) export – bonding did not show up in global export;
*) export – exclude default values from export in “/interface l2tp-server server” menu;
*) export – fixed export when ipv6 address was taken from pool;
*) export – fixed rare situations when not whole config was exported;
*) export – updated defaults for compact export;
*) fastpath – fixed crash when packet arrives on disabled interface;
*) fastpath – fixed show rx-bits-per-second on all VLAN interfaces;
*) fastpath – improved vlan fastpath;
*) fasttrack – fixed timer updating in connections table for fasttrack connections;
*) fetch – decrease connection idle timeout;
*) firewall – added experimental “action=route” in mangle prerouting – that forces packets to specific gateway by ignoring routing decisions (CLI only);
*) health – always report fan speed (even if it is 0);
*) health – swap fan2 and fan3 on CCR1072;
*) hotspot – clean-up all dead entries at once;
*) hotspot – fixed possible deadlock;
*) hotspot – improved html page resistance against attacks;
*) hotspot – make video tag work properly on hotspot login.html page
*) ip – rename max-arp-entries to less confusing max-neighbor-entries;
*) ippool6 – fixed potential crash;
*) ipsec – always re-key ph1 because it was possible that ph1 without DPD would expire;
*) ipsec – better flush on proposal change;
*) ipsec – fixed crash on policy update;
*) ipsec – fixed fast ph2 SA addition;
*) ipsec – fixed larval SA refresh for display;
*) ipsec – fixed multiple consecutive dynamic policy flush;
*) l2tp & pppoe – fixed user traffic accounting when fastpath was used;
*) l2tp – introduced per tunnel allow-fast-path option;
*) l2tp – added support for Hidden AVP, it is needed for proxy authentication;
*) l2tp – added support for max-sessions;
*) l2tp – added support for proxy authentication when receiving forwarded PPPoE sessions;
*) l2tp – fixed small memory leak on reconnects;
*) lcd – fixed branding packet logo drawing on startup;
*) led – fixed crash on assigned interface removal;
*) led – turn on fault led on CCR1072 if CPU too hot;
*) leds – fixed AP-CAP led blinking after successful association to CAPsMAN;
*) lte – added ipv6 support for SXT LTE;
*) lte – changed AT command processing;
*) lte – changed AT parsing because supported Huawei modems use unsolicited events instead of polling;
*) lte – fixed bandlux modem dialing;
*) lte – fixed crash on early initialization;
*) lte – improve situation when SXT modem never finds operator;
*) lte – replaced signal-strength with rssi in info command;
*) lte – support Alt38XX modem;
*) lte – support for zte mf820s2;
*) lte – supported modems now use unsolicited events for network monitoring;
*) lte – use timer for modem info;
*) map lite – added hardware WPS button support;
*) mpls – do not reset VPLS on TE tunnel re-optimize;
*) ntp – fixed ntp client hangs in reached state;
*) ospf – fixed crash when getting neighbor router-id in NBMA area;
*) ppp – fixed ppp interface reconnect when uPnP was used;
*) ppp – close connection if peer wants to re-authenticate;
*) ppp – fixed memory leak high number of pppoe clients to the same server;
*) ppp – fixed ppp crash if lcp packets were lost and authentication got delayed;
*) ppp – fixed some clients can not connect due to LCP restart;
*) pppoe – added rfc4679 support;
*) pppoe – fixed crash when removing pppoe service;
*) pppoe-server – added pado-delay option;
*) profiler – classify certificate signing;
*) proxy – fixed ftp request url decode;
*) queue – improve “/queue interface” menu;
*) quickset – fixed invalid date adjusted the signal threshold for the signal chart and refresh rate;
*) quickset – fixed situations when hidden password was passed as ******* from winbox nd webfig;
*) radius – warn radius client if incorrect secret is being used;
*) rb3011 – fixed sfp compatibility with CCR when using direct attached cables;
*) rb3011 – fixed time keeping;
*) rb3011 – make ether6-ether10 work if SFP module is present on bootup;
*) romon-ssh – fixed active addresses for romon user;
*) route – do not show duplicate gateway on connected route;
*) route – fixed filter by routing table;
*) routing – fixed rare kernel failure on different dynamic routing configurations;
*) routing – fixed routing-marks were not erased from memory when they are not being used;
*) services – do not show ssh entry under ip services if security package is disabled;
*) snmp – don’t group oids for bulk get with maxreps > 1 ;
*) snmp – fixed cpu load reporting to 1min average and change oid to 1.3.6.1.4.1.2021.11.10.0;
*) snmp – fixed dhcpv4 lease hwaddr format according to mib;
*) snmp – fixed getbulk result ordering with multiple request OIDs;
*) ssh – simplify login process;
*) ssl – optimized certificate update;
*) system – log time changes;
*) tile – corrected max-l2mtu;
*) tile – fixed fastpath related memory leak;
*) tile – fixed performance regression on switch chip (introduced in 6.33rc18);
*) tile-crypto – fixed minor memory leak;
*) tool fetch – fixed https cleanup on user stop while handshaking;
*) trafficgen – fixed console arguments;
*) trafficgen – fixed crash when unexpected stream reappears;
*) trafflow – fixed potential deadlock;
*) ups – fixed entering hibernate mode when below battery capacity limit;
*) users – added separate RoMoN policy;
*) webfig – fixed firewall rule sorting did not work in other chains except all;
*) webfig – show single item groups as optional values;
*) webfig – sort numeric columns numerically even if they contain some text;
*) winbox – added “pw-type” to “/interface vpls bgp-vpls” menu;
*) winbox – added “use-control-word” and “pw-mtu” to “/interface vpls cisco-bgp-vpls” menu;
*) winbox – added /interface wireless setup-repeater;
*) winbox – added all the rates settings to the capsman;
*) winbox – added flip-screen option to lcd settings;
*) winbox – added init-delay option to routerboard settings;
*) winbox – added ipv6 firewall missing log option;
*) winbox – added missing eap-ttls-mschamv2 method to wireless security profile;
*) winbox – added mtu=auto support to eoipv6 tunnel;
*) winbox – added sfp-mac for GPON interfaces;
*) winbox – added support for new settings from wireless-rep package;
*) winbox – added support for route action in mangle rules;
*) winbox – allow to set additional-network-modes;
*) winbox – allow to set multiple dh-groups;
*) winbox – disable autostart for wireless scan,snooper,align etc. on open;
*) winbox – do not show “enable-jumper-reset” setting on devices without serial port;
*) winbox – do not show real-tx-power column in current-tx-power by default;
*) winbox – fixed unset options in /routing ospf interface menu;
*) winbox – hotspot default-trial user shows profile as “unknown” in Winbox;
*) winbox – improved winbox connection loss detection, fixes winbox safe mode;
*) winbox – limit ospf key to 16 symbols;
*) winbox – make additional-network-mode optional for lte interface;
*) winbox – make build with latest lte changes;
*) winbox – make mrru disabled and set mtu+mru to auto by default on new servers;
*) winbox – show “usb-power-reset” option on all boards that have it;
*) wireless – fixed crash on nstreme-dual interface stats update;
*) wireless-rep – added 802.11g/n only band;
*) wireless-rep – added STEP feature for the scan-list;
*) wireless-rep – added WPS client support;
*) wireless-rep – added support for saving wireless scan results to file;
*) wireless-rep – added support for wireless background scan for 802.11 protocol;
*) wireless-rep – added support for wireless repeater mode for 802.11 protocol;
*) wireless-rep – added support for wireless scan rounds setting;
*) wireless-rep – adjust roaming scan times;
*) wireless-rep – allow to connect to AP after scan;
*) wireless-rep – do not allow empty ssid for AP modes;
*) wireless-rep – fixed crash on non-HT clients;
*) wireless-rep – fixed latency issues with Intel wireless clients;
*) wireless-rep – fixed nv2 protocol;
*) wireless-rep – fixed qos frame-priority when nv2 protocol used in station-wds mode;
*) wireless-rep – fixed signal leds;
*) wireless-rep – fixed speed issue when connected with Intel 802.11ac;
*) wireless-rep – initial support for station roaming for station mode in 802.11 protocol;
*) wireless-rep – request interface name for setup-repeater;
*) wireless-rep – use full identity where possible;
*) wireless-rep,capsman – added more configuration settings;
*) wireless-rep,capsman – added rate config support.

New version’s forum discussion topic,
http://forum.mikrotik.com/viewtopic.php?f=1&t=107307

Source : Notification List Mikrotik, Sent 19 April 2016 at 20:46

Advertisements

Author: admin@khsnndzf

Good People

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s